2-Aziridinecarboxylic acid, 1-[3-(triethoxysilyl)propyl]-, methyl ester - Names and Identifiers
2-Aziridinecarboxylic acid, 1-[3-(triethoxysilyl)propyl]-, methyl ester - Physico-chemical Properties
Molecular Formula | C13H27NO5Si
|
Molar Mass | 305.44 |
Density | 1.053±0.06 g/cm3(Predicted) |
Boling Point | 317.7±37.0 °C(Predicted) |
Specific Gravity | 1.052 |
pKa | 5.33±0.40(Predicted) |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | 1.4197 |
2-Aziridinecarboxylic acid, 1-[3-(triethoxysilyl)propyl]-, methyl ester - Risk and Safety
Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
TSCA | No |
2-Aziridinecarboxylic acid, 1-[3-(triethoxysilyl)propyl]-, methyl ester - Introduction
N-[3-(Triethoxysilyl)propyl-2-carbomethoxyaziridine is an organic compound with the chemical formula C13H28N2O4Si. It has the following properties:
1. Appearance: colorless liquid.
2. Solubility: Soluble in organic solvents, such as methanol, ethanol and acetone.
3. Melting Point: about -50 ℃.
4. Boiling point: About 200 ℃.
5. Relative density: about 1.02.
N-[3-(Triethoxysilyl)propyl-2-carbomethoxyaziridine are widely used in the field of organic synthesis, mainly as catalysts, crosslinking agents and surface treatment agents. Its Main uses include:
1. Catalyst: in chemical reactions, it can promote the reaction rate and improve the yield of reaction products.
2. Crosslinking agent: It can make the polymer or resin form a three-dimensional network structure and improve the mechanical properties and heat resistance of the material.
3. Surface treatment agent: It can form a protective film on the surface of the material to provide weather resistance and anti-pollution performance.
The production method of N-[3-(Triethoxysilyl)propyl-2-carbomethoxyaziridine is generally obtained by a chemical synthesis method. The specific preparation method can be adjusted according to the selection of different reaction conditions, catalysts and raw materials.
With regard to safety information, specific hazard data for this compound may vary depending on experimental conditions, uses and national standards. However, in general, the following points should be noted when handling this compound:
1. Avoid inhalation: avoid prolonged exposure to high concentrations of gas or vapor, so as not to cause irritation or damage to the human respiratory system.
2. Avoid contact with skin and eyes: When exposed to the compound, immediately rinse the affected area with plenty of water and seek medical help.
3. Storage Note: When storing compounds, keep them well ventilated and away from fire and oxidizing agents.
Last Update:2024-04-10 22:29:15